Mahindra eMax 20S Attachments & Implements

The Mahindra eMax 20S is a 19.4 HP compact tractor producing 14.2 PTO HP through a 540 RPM PTO, with a Category I Narrow hitch and a 3-point lift capacity of 680 lb. Below: every attachment in our database checked against these specs.

Engine horsepower: 19.4 HP
PTO horsepower: 14.2 HP
PTO speeds: 540 RPM
Hitch: Category I Narrow (Category I)
3-point lift capacity: 680 lb
Class: Sub-compact
Series: eMax Series
Front loader: 23L
Loader lift at pivot pin: 617 lb

Attachment fit for the eMax 20S is decided by four of these figures: hitch category, PTO horsepower, PTO shaft speed, and implement weight against the 680 lb three-point lift rating. Because this is a sub-compact tractor, implements must also be rated for sub-compact use. Front-mount attachments additionally require the correct loader quick-attach type and, for grapples, a third hydraulic function. Every figure above is read from manufacturer documentation, linked on the page.

How the eMax 20S compares

The Mahindra eMax 20S is rated at 14.2 PTO horsepower, which is more than 1 of the other 194 tractors in our database (the median is 31). Among the 15 Mahindra models in the database it ranks 15th by PTO horsepower. Its PTO figure is 73 percent of its 19.4 engine horsepower; across the database the median is 82 percent.

Its three-point lift is 680 lb at 24 inches behind the lift points, more than 6 of the 173 other tractors that publish one (the median is 2,081 lb). Its loader lifts about 401 lb at 24 inches forward of the pin (Estimated from pivot-pin rating (617 lbs) × 0.65 (industry rule of thumb)), more than 0 of the 65 other tractors with loader data on file (the median is 812 lb).

Of the 173 attachments checked, 0 are full matches, 94 are compatible with notes and 79 are ruled out. The median tractor in the database has 133 full matches, and this one has more than 0 of the other 194. The 79 ruled out fail on PTO horsepower (70), hitch category (1) and lift capacity (21); a pairing can fail on more than one check.

It has no full match among the 18 rotary cutters, 19 rotary tillers, 22 box blades, 15 post hole diggers, 16 finish mowers, 12 snow blowers, 15 rear blades, 11 flail mowers, 14 landscape rakes, 13 grapples, 7 pallet forks, 6 bale spears and 5 land planes.

The closest tractors by PTO horsepower are the Kubota BX1880 (13.7 HP, −0.5), the John Deere 1023E (14.9 HP, +0.7), the LS Tractor MT122 (15 HP, +0.8).

Compare: Kubota BX1880 · John Deere 1023E · LS Tractor MT122

Mahindra eMax 20S attachments by task

Checked against every attachment in the database, the Mahindra eMax 20S returns 0 full matches, 94 compatible with notes, and 79 ruled out.

What fits the Mahindra eMax 20S (0)

No full matches in our current database for this tractor.

Compatible with notes (94)

Showing 8 of 94, the ones closest to this tractor's limits.

Titan Attachments 3-Point Land Leveler and Grader 7ft — Land plane · 663 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Titan Attachments Economy Grapple 48" — Grapple · 390 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 390 lbs against 401 lbs of usable capacity (Estimated from pivot-pin rating (617 lbs) × 0.65 (industry rule of thumb)), consuming 97% of the loader before you pick anything up. That leaves roughly 11 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
Land Pride RCR1248 — Rotary cutter · 15+ HP · 413 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
Land Pride RTA1250 — Rotary tiller · 15+ HP · 421 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
Land Pride FDR1648 — Finish mower · 15+ HP · 486 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
Land Pride FDR1660 — Finish mower · 15+ HP · 577 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
King Kutter RFM-60 — Finish mower · 15+ HP · 554 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
CountyLine RT4CL — Rotary tiller · 15+ HP · 591 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Does not fit the eMax 20S (79)

Showing 8 of 79, the ones closest to this tractor's limits.

Land Pride RG1072 — Grapple · 408 lbs. This attachment weighs 408 lbs empty, against 401 lbs of usable capacity on the Mahindra eMax 20S loader (Estimated from pivot-pin rating (617 lbs) × 0.65 (industry rule of thumb)). The attachment alone exceeds what this loader can carry - before any material is picked up.
BEFCO H40-S 48" — Flail mower · 16+ HP · 552 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Tractor PTO HP (14.2) is more than 10% below the implement minimum (16). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Titan Attachments Economy Grapple 60" — Grapple · 470 lbs. This attachment weighs 470 lbs empty, against 401 lbs of usable capacity on the Mahindra eMax 20S loader (Estimated from pivot-pin rating (617 lbs) × 0.65 (industry rule of thumb)). The attachment alone exceeds what this loader can carry - before any material is picked up.
Land Pride RG1572 — Grapple · 490 lbs. This attachment weighs 490 lbs empty, against 401 lbs of usable capacity on the Mahindra eMax 20S loader (Estimated from pivot-pin rating (617 lbs) × 0.65 (industry rule of thumb)). The attachment alone exceeds what this loader can carry - before any material is picked up.
Land Pride SB1051 — Snow blower · 18+ HP · 390 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Tractor PTO HP (14.2) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride SB1064 — Snow blower · 18+ HP · 501 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Tractor PTO HP (14.2) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Frontier RC2048 — Rotary cutter · 18+ HP · 516 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Tractor PTO HP (14.2) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
King Kutter PHD-YK — Post hole digger · 18+ HP · 331 lbs. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Tractor PTO HP (14.2) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Frequently asked questions

What is the PTO horsepower of the Mahindra eMax 20S?

The Mahindra eMax 20S produces 14.2 PTO horsepower (engine HP: 19.4), per Mahindra eMax Series Brochure. MahindraUSA.com.

What 3-point hitch category does the Mahindra eMax 20S use?

The Mahindra eMax 20S uses Category I Narrow.

What is the lift capacity of the Mahindra eMax 20S?

The Mahindra eMax 20S has a 3-point lift capacity of 680 lbs at 24 inches behind the lift points.

What rotary cutters fit the Mahindra eMax 20S?

No rotary cutters in our current database are a full match for the eMax 20S. Check the "Compatible with notes" and incompatible sections below for the closest options.

Will a King Kutter RTG-60 fit the Mahindra eMax 20S?

No. The King Kutter RTG-60 is incompatible with the eMax 20S. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Tractor PTO HP (14.2) is more than 10% below the implement minimum (20).