John Deere 1023E Attachments & Implements

The John Deere 1023E is a 21.5 HP compact tractor producing 14.9 PTO HP through a 540 RPM PTO, with a Limited Category 1. IMatch compatible hitch and a 3-point lift capacity of 758 lb. Below: every attachment in our database checked against these specs.

Engine horsepower

21.5 HP

PTO horsepower

14.9 HP

PTO speeds

540 RPM

Hitch

Limited Category 1. IMatch compatible (Limited Category 1)

3-point lift capacity

758 lb

Class

Sub-compact

Series

1 Series

Front loader

120R

Loader lift at pivot pin

803 lb

Loader quick-attach

JDQA

Attachment fit for the 1023E is decided by four of these figures: hitch category, PTO horsepower, PTO shaft speed, and implement weight against the 758 lb three-point lift rating. Because this is a sub-compact tractor, implements must also be rated for sub-compact use. Front-mount attachments additionally require the correct loader quick-attach type and, for grapples, a third hydraulic function. Every figure above is read from manufacturer documentation, linked on the page.

How the 1023E compares

The John Deere 1023E is rated at 14.9 PTO horsepower, which is more than 2 of the other 194 tractors in our database (the median is 31). Among the 19 John Deere models in the database it ranks 19th by PTO horsepower. Its PTO figure is 69 percent of its 21.5 engine horsepower; across the database the median is 82 percent.

Its three-point lift is 758 lb at 24 inches behind the lift points, more than 19 of the 173 other tractors that publish one (the median is 2,081 lb). Its loader lifts about 525 lb at 24 inches forward of the pin (500 mm forward of pin (metric SAE). Close approximation), more than 7 of the 65 other tractors with loader data on file (the median is 812 lb).

Of the 173 attachments checked, 0 are full matches, 99 are compatible with notes and 74 are ruled out. The median tractor in the database has 133 full matches, and this one has more than 0 of the other 194. The 74 ruled out fail on PTO horsepower (69), hitch category (1) and lift capacity (13); a pairing can fail on more than one check.

It has no full match among the 18 rotary cutters, 19 rotary tillers, 22 box blades, 15 post hole diggers, 16 finish mowers, 12 snow blowers, 15 rear blades, 11 flail mowers, 14 landscape rakes, 13 grapples, 7 pallet forks, 6 bale spears and 5 land planes.

The closest tractors by PTO horsepower are the LS Tractor MT122 (15 HP, +0.1), the TYM T224 (15.1 HP, +0.2), the Branson 2205H (15.4 HP, +0.5).

Compare: LS Tractor MT122 · TYM T224 · Branson 2205H

John Deere 1023E attachments by task

Checked against every attachment in the database, the John Deere 1023E returns 0 full matches, 99 compatible with notes, and 74 ruled out.

What fits the John Deere 1023E (0)

No full matches in our current database for this tractor.

Compatible with notes (99)

Showing 8 of 99, the ones closest to this tractor's limits.

• Land Pride RCR1248 — Rotary cutter · 15+ HP · 413 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• Land Pride RTA1250 — Rotary tiller · 15+ HP · 421 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• Land Pride FDR1648 — Finish mower · 15+ HP · 486 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• Land Pride FDR1660 — Finish mower · 15+ HP · 577 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• King Kutter RFM-60 — Finish mower · 15+ HP · 554 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• CountyLine RT4CL — Rotary tiller · 15+ HP · 591 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• WoodMaxx FM-54 — Flail mower · 15+ HP . This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. The empty weight of this implement is not on file, so we cannot check it against the John Deere 1023E's 3-point lift capacity. Confirm the implement's weight against the operator's manual before mounting. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Farmry TSB48 — Snow blower · 15+ HP · 595 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Does not fit the 1023E (74)

Showing 8 of 74, the ones closest to this tractor's limits.

• Titan Attachments Grade 50 Standard Series Root Grapple Bucket 60" SSQA — Grapple · 617 lbs. This attachment weighs 617 lbs empty, against 525 lbs of usable capacity on the John Deere 1023E loader (500 mm forward of pin (metric SAE). Close approximation). The attachment alone exceeds what this loader can carry - before any material is picked up.
• Land Pride SB1051 — Snow blower · 18+ HP · 390 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Land Pride SB1064 — Snow blower · 18+ HP · 501 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Frontier RC2048 — Rotary cutter · 18+ HP · 516 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• King Kutter PHD-YK — Post hole digger · 18+ HP · 331 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Titan Attachments PHD 9" — Post hole digger · 18+ HP · 223 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Titan Attachments Finish Mower 48" — Finish mower · 18+ HP · 430 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Farmry TSB60 — Snow blower · 18+ HP · 715 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (18). Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Frequently asked questions

What is the PTO horsepower of the John Deere 1023E?

The John Deere 1023E produces 14.9 PTO horsepower (engine HP: 21.5), per John Deere 1023E. Deere.com.

What 3-point hitch category does the John Deere 1023E use?

The John Deere 1023E uses Limited Category 1. IMatch compatible.

What is the lift capacity of the John Deere 1023E?

The John Deere 1023E has a 3-point lift capacity of 758 lbs at 24 inches behind the lift points.

What rotary cutters fit the John Deere 1023E?

No rotary cutters in our current database are a full match for the 1023E. Check the "Compatible with notes" and incompatible sections below for the closest options.

Will a King Kutter RTG-60 fit the John Deere 1023E?

No. The King Kutter RTG-60 is incompatible with the 1023E. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (20).