Case IH Farmall 75C Attachments & Implements
The Case IH Farmall 75C is a 74 HP compact tractor producing 65 PTO HP through a 540/1000 RPM PTO, with a SAE Category 2 hitch and a 3-point lift capacity of 3700 lb. Below: every attachment in our database checked against these specs.
- Engine horsepower
- 74 HP
- PTO horsepower
- 65 HP
- PTO speeds
- 540 / 1000 RPM
- Hitch
- SAE Category 2 (Category II)
- 3-point lift capacity
- 3700 lb
- Class
- Compact
- Series
- Farmall C Series
- Front loader
- L565
- Loader lift at pivot pin
- 2734 lb
- Loader quick-attach
- pin-on
Built in Jesi, Italy on a heavier utility frame than the A-series.
Attachment fit for the Farmall 75C is decided by four of these figures: hitch category, PTO horsepower, PTO shaft speed, and implement weight against the 3700 lb three-point lift rating. Implements rated for sub-compact tractors also fit, with capacity to spare. Front-mount attachments additionally require the correct loader quick-attach type and, for grapples, a third hydraulic function. Every figure above is read from manufacturer documentation, linked on the page.
Case IH Farmall 75C attachments by task
Checked against every attachment in the database, the Case IH Farmall 75C returns 6 full matches, 183 compatible with notes, and 0 ruled out. Full matches by task: Land plane (3), Rotary tiller (1), Post hole digger (1), Snow blower (1).
What fits the Case IH Farmall 75C (6)
- Frontier RT1157 — Rotary tiller · 25+ HP · 480 lbs
- Frontier PHD395 — Post hole digger · 35+ HP · 245 lbs
- Woods SW84 — Snow blower · 35+ HP · 920 lbs
- King Kutter DEG-84 — Land plane · 690 lbs
- Titan Attachments 3-Point Land Leveler and Grader 6ft — Land plane · 615 lbs
- Titan Attachments 3-Point Land Leveler and Grader 7ft — Land plane · 663 lbs
Compatible with notes (183)
Showing 8 of 183.
- Land Pride RCR1248 — Rotary cutter · 15+ HP · 385 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- King Kutter RTG-60 — Rotary tiller · 20+ HP · 380 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Land Pride BB0548 — Box blade · 320 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- CountyLine PHD Cat I — Post hole digger · 12+ HP · 195 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Woods RD72 — Rotary cutter · 25+ HP · 580 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Land Pride RCR1260 — Rotary cutter · 20+ HP · 496 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Land Pride RCR1272 — Rotary cutter · 25+ HP · 568 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Land Pride RTA1250 — Rotary tiller · 15+ HP · 421 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
Does not fit the Farmall 75C (0)
No incompatible attachments in current database.
Frequently asked questions
What is the PTO horsepower of the Case IH Farmall 75C?
The Case IH Farmall 75C produces 65 PTO horsepower (engine HP: 74), per Case IH Farmall Utility 75C. CaseIH.com.
What 3-point hitch category does the Case IH Farmall 75C use?
The Case IH Farmall 75C uses SAE Category 2.
What is the lift capacity of the Case IH Farmall 75C?
The Case IH Farmall 75C has a 3-point lift capacity of 3700 lbs at 24 inches behind the lift points.
What rotary cutters fit the Case IH Farmall 75C?
No rotary cutters in our current database are a full match for the Farmall 75C. Check the "Compatible with notes" and incompatible sections below for the closest options.
Can I run a 1000 RPM PTO implement on the Case IH Farmall 75C?
The Farmall 75C has a 540/1000 RPM PTO. Implements requiring 1000 RPM PTO are not compatible.