Zetor M70PSC Attachments & Implements
The Zetor M70PSC is a 75 HP compact tractor producing 62 PTO HP through a 540 RPM PTO, with a SAE Category 2 hitch and a 3-point lift capacity of 4270 lb. Below: every attachment in our database checked against these specs.
- Engine horsepower
- 75 HP
- PTO horsepower
- 62 HP
- PTO speeds
- 540 RPM
- Hitch
- SAE Category 2 (Category II)
- 3-point lift capacity
- 4270 lb
- Class
- Compact
- Series
- Utility Ag
- Front loader
- ZL65/75
Deutz turbocharged 4-cylinder rated 75 max engine HP and 68 net HP. 24/24 power shuttle with creeper and a dual multi-wet clutch pack. Independent 540/540E/1000 PTO, with a third hydraulic function installed at the factory.
Attachment fit for the M70PSC is decided by four of these figures: hitch category, PTO horsepower, PTO shaft speed, and implement weight against the 4270 lb three-point lift rating. Implements rated for sub-compact tractors also fit, with capacity to spare. Front-mount attachments additionally require the correct loader quick-attach type and, for grapples, a third hydraulic function. Every figure above is read from manufacturer documentation, linked on the page.
Zetor M70PSC attachments by task
Checked against every attachment in the database, the Zetor M70PSC returns 6 full matches, 183 compatible with notes, and 0 ruled out. Full matches by task: Land plane (3), Rotary tiller (1), Post hole digger (1), Snow blower (1).
What fits the Zetor M70PSC (6)
- Frontier RT1157 — Rotary tiller · 25+ HP · 480 lbs
- Frontier PHD395 — Post hole digger · 35+ HP · 245 lbs
- Woods SW84 — Snow blower · 35+ HP · 920 lbs
- King Kutter DEG-84 — Land plane · 690 lbs
- Titan Attachments 3-Point Land Leveler and Grader 6ft — Land plane · 615 lbs
- Titan Attachments 3-Point Land Leveler and Grader 7ft — Land plane · 663 lbs
Compatible with notes (183)
Showing 8 of 183.
- Land Pride RCR1248 — Rotary cutter · 15+ HP · 385 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- King Kutter RTG-60 — Rotary tiller · 20+ HP · 380 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Land Pride BB0548 — Box blade · 320 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- CountyLine PHD Cat I — Post hole digger · 12+ HP · 195 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Woods RD72 — Rotary cutter · 25+ HP · 580 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Land Pride RCR1260 — Rotary cutter · 20+ HP · 496 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Land Pride RCR1272 — Rotary cutter · 25+ HP · 568 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
- Land Pride RTA1250 — Rotary tiller · 15+ HP · 421 lbs. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required - roughly $40-80 a set and widely available. Confirm lower-link spacing before buying.
Does not fit the M70PSC (0)
No incompatible attachments in current database.
Frequently asked questions
What is the PTO horsepower of the Zetor M70PSC?
The Zetor M70PSC produces 62 PTO horsepower (engine HP: 75), per Zetor North America official M-Series Product Guide (Rev 07/2021).
What 3-point hitch category does the Zetor M70PSC use?
The Zetor M70PSC uses SAE Category 2.
What is the lift capacity of the Zetor M70PSC?
The Zetor M70PSC has a 3-point lift capacity of 4270 lbs at 24 inches behind the lift points.
What rotary cutters fit the Zetor M70PSC?
No rotary cutters in our current database are a full match for the M70PSC. Check the "Compatible with notes" and incompatible sections below for the closest options.
Can I run a 1000 RPM PTO implement on the Zetor M70PSC?
The M70PSC has a 540 RPM PTO. Implements requiring 1000 RPM PTO are not compatible.