King Kutter DEG-84

The King Kutter DEG-84 is a land plane with no PTO requirement, attaching via Category I 3-point hitch and weighing 690 lbs. Verified against every tractor in our database below.

Type

Land plane

Hitch category

Category I

Minimum PTO horsepower

None required

PTO speed

No PTO drive

Working weight

690 lb

Working width

84 in

Sub-compact rated

No

A tractor fits this land plane when its hitch accepts Category I implements, and its three-point lift capacity exceeds the 690 lb working weight with headroom for the load the implement carries. This model is not rated for sub-compact tractors. Weight and horsepower figures here are read from the manufacturer document linked on the page, not from a retail listing.

Which tractors fit the King Kutter DEG-84

Checked against every tractor in the database, the King Kutter DEG-84 is a full match on 163 models, fits 19 with notes, and does not fit 13.

Tractors that fit (163)

Showing 8 of 163.

• Kubota B2601HSD — 19.5 PTO HP · 1290 lbs lift
• Kubota B2301HSD — 17.4 PTO HP · 1411 lbs lift
• Kubota L2501 — 20.5 PTO HP · 1918 lbs lift
• Kubota L3301 — 27.7 PTO HP · 1985 lbs lift
• John Deere 3025E — 17.4 PTO HP · 1356 lbs lift
• Kioti CK2610 — 21.7 PTO HP · 1631 lbs lift
• Mahindra 1626 — 22.2 PTO HP · 1323 lbs lift
• Mahindra 1635 — 26 PTO HP · 2646 lbs lift

Compatible with notes (19)

Showing 8 of 19.

• John Deere 1023E — 14.9 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• John Deere 1025R — 17.2 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• John Deere 2025R — 17.2 PTO HP · 915 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
• Kioti CS2210 — 16.3 PTO HP · 700 lbs lift. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kioti CS2510 — 18.5 PTO HP · 700 lbs lift. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• New Holland Workmaster 25S — 17.4 PTO HP · 870 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• New Holland Boomer 24 — 18.5 PTO HP · 1433 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• LS Tractor MT125 — 17.2 PTO HP · 728 lbs lift. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Tractors that do not fit (13)

Showing 8 of 13.

• Kubota BX1880 — 13.7 PTO HP · 680 lbs lift. Implement weight (690 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kubota BX2380 — 17.7 PTO HP · 680 lbs lift. Implement weight (690 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kubota BX2680 — 19.5 PTO HP · 680 lbs lift. Implement weight (690 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kubota BX23S — 17.7 PTO HP · 680 lbs lift. Implement weight (690 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Massey Ferguson GC1725M — 18.5 PTO HP · 661 lbs lift. Implement weight (690 lbs) exceeds tractor lift capacity (661 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Mahindra eMax 20S — 14.2 PTO HP · 680 lbs lift. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than the 26-inch Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Implement weight (690 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Mahindra eMax 22L — 15.9 PTO HP · 680 lbs lift. Implement weight (690 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Mahindra eMax 25L — 16.9 PTO HP · 680 lbs lift. Implement weight (690 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Frequently asked questions

What is the minimum PTO horsepower for the King Kutter DEG-84?

The King Kutter DEG-84 requires 0 PTO HP minimum.

What hitch category does the King Kutter DEG-84 use?

The King Kutter DEG-84 attaches via Category I 3-point hitch.

How heavy is the King Kutter DEG-84?

690 lbs.

Does the King Kutter DEG-84 fit a Kubota BX2380?

Verdict: INCOMPATIBLE.

Is the King Kutter DEG-84 sub-compact compatible?

Not specifically rated for sub-compact tractors. Verify clearance and geometry with your dealer before purchase.