King Kutter DEG-72
The King Kutter DEG-72 is a land plane with no PTO requirement, attaching via Category I 3-point hitch and weighing 565 lbs. Verified against every tractor in our database below.
- Type
- Land plane
- Hitch category
- Category I
- Minimum PTO horsepower
- None required
- PTO speed
- No PTO drive
- Working weight
- 565 lb
- Working width
- 72 in
- Sub-compact rated
- No
A tractor fits this land plane when its hitch accepts Category I implements, and its three-point lift capacity exceeds the 565 lb working weight with headroom for the load the implement carries. This model is not rated for sub-compact tractors. Weight and horsepower figures here are read from the manufacturer document linked on the page, not from a retail listing.
Which tractors fit the King Kutter DEG-72
Checked against every tractor in the database, the King Kutter DEG-72 is a full match on 157 models, fits 38 with notes, and does not fit 0.
Tractors that fit (157)
Showing 8 of 157.
- Kubota B2601HSD — 19.5 PTO HP · 1290 lbs lift
- Kubota B2301HSD — 17.4 PTO HP · 1411 lbs lift
- Kubota L2501 — 20.5 PTO HP · 1918 lbs lift
- Kubota L3301 — 27.7 PTO HP · 1985 lbs lift
- John Deere 3025E — 17.4 PTO HP · 1356 lbs lift
- Kioti CK2610 — 21.7 PTO HP · 1631 lbs lift
- Mahindra 1626 — 22.2 PTO HP · 1323 lbs lift
- Mahindra 1635 — 26 PTO HP · 2646 lbs lift
Compatible with notes (38)
Showing 8 of 38.
- Kubota BX1880 — 13.7 PTO HP · 680 lbs lift. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- Kubota BX2380 — 17.7 PTO HP · 680 lbs lift. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- Kubota BX2680 — 19.5 PTO HP · 680 lbs lift. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- Kubota BX23S — 17.7 PTO HP · 680 lbs lift. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- John Deere 1023E — 14.9 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- John Deere 1025R — 17.2 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- John Deere 2025R — 17.2 PTO HP · 915 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
- Massey Ferguson GC1725M — 18.5 PTO HP · 661 lbs lift. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Tractors that do not fit (0)
None. Every tractor in our database is compatible.
Frequently asked questions
What is the minimum PTO horsepower for the King Kutter DEG-72?
The King Kutter DEG-72 requires 0 PTO HP minimum.
What hitch category does the King Kutter DEG-72 use?
The King Kutter DEG-72 attaches via Category I 3-point hitch.
How heavy is the King Kutter DEG-72?
565 lbs.
Does the King Kutter DEG-72 fit a Kubota BX2380?
Verdict: COMPATIBLE WITH NOTES.
Is the King Kutter DEG-72 sub-compact compatible?
Not specifically rated for sub-compact tractors. Verify clearance and geometry with your dealer before purchase.