Zetor M25HTL Attachments & Implements

The Zetor M25HTL is a 25.3 HP compact tractor producing 20.2 PTO HP through a 540 RPM PTO, with a HD Category 1, position control hitch and a 3-point lift capacity of 1325 lb. Below: every attachment in our database checked against these specs.

Engine horsepower: 25.3 HP
PTO horsepower: 20.2 HP
PTO speeds: 540 RPM
Hitch: HD Category 1, position control (Category I)
3-point lift capacity: 1325 lb
Class: Compact
Series: Compact
Front loader: ZL25-QA (54" bucket)
Loader quick-attach: SSQA

Turnbuckle and chain sway adjustment. Independent PTO, 540 rear and 2500 mid. Also sold as the M25HTLB with a factory subframe backhoe and 12-inch bucket.

Attachment fit for the M25HTL is decided by four of these figures: hitch category, PTO horsepower, PTO shaft speed, and implement weight against the 1325 lb three-point lift rating. Implements rated for sub-compact tractors also fit, with capacity to spare. Front-mount attachments additionally require the correct loader quick-attach type and, for grapples, a third hydraulic function. Every figure above is read from manufacturer documentation, linked on the page.

Zetor M25HTL attachments by task

Checked against every attachment in the database, the Zetor M25HTL returns 136 full matches, 11 compatible with notes, and 42 ruled out. Full matches by task: Box blade (23), Rear blade (18), Finish mower (16), Landscape rake (16), Post hole digger (13), Rotary tiller (11), Snow blower (9), Rotary cutter (7), Flail mower (7), Bale spear (6), Pallet forks (5), Land plane (5).

What fits the Zetor M25HTL (136)

Showing 8 of 136.

Land Pride RCR1248 — Rotary cutter · 15+ HP · 385 lbs
King Kutter RTG-60 — Rotary tiller · 20+ HP · 380 lbs
Land Pride BB0548 — Box blade · 320 lbs
CountyLine PHD Cat I — Post hole digger · 12+ HP · 195 lbs
Land Pride RCR1260 — Rotary cutter · 20+ HP · 496 lbs
Land Pride RTA1250 — Rotary tiller · 15+ HP · 421 lbs
Land Pride RTA1258 — Rotary tiller · 20+ HP · 448 lbs
Land Pride RTR1258 — Rotary tiller · 20+ HP · 463 lbs

Compatible with notes (11)

Showing 8 of 11.

Land Pride RG1060 — Grapple · 375 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 375 lbs against 502 lbs of usable capacity (Conservative floor from the manufacturer's unqualified rating (772 lbs) × 0.65. The measurement point is not stated; this is the lowest value any stated basis would give), consuming 75% of the loader before you pick anything up. That leaves roughly 127 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
Land Pride RG1072 — Grapple · 408 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 408 lbs against 502 lbs of usable capacity (Conservative floor from the manufacturer's unqualified rating (772 lbs) × 0.65. The measurement point is not stated; this is the lowest value any stated basis would give), consuming 81% of the loader before you pick anything up. That leaves roughly 94 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
Titan Attachments Economy Grapple 48" — Grapple · 390 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 390 lbs against 502 lbs of usable capacity (Conservative floor from the manufacturer's unqualified rating (772 lbs) × 0.65. The measurement point is not stated; this is the lowest value any stated basis would give), consuming 78% of the loader before you pick anything up. That leaves roughly 112 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
Titan Attachments Economy Grapple 60" — Grapple · 470 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 470 lbs against 502 lbs of usable capacity (Conservative floor from the manufacturer's unqualified rating (772 lbs) × 0.65. The measurement point is not stated; this is the lowest value any stated basis would give), consuming 94% of the loader before you pick anything up. That leaves roughly 32 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
Farmer Helper EFGC125 — Flail mower · 22+ HP · 600 lbs. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
Bush Hog Loader Grapple 60" — Grapple · 326 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 326 lbs against 502 lbs of usable capacity (Conservative floor from the manufacturer's unqualified rating (772 lbs) × 0.65. The measurement point is not stated; this is the lowest value any stated basis would give), consuming 65% of the loader before you pick anything up. That leaves roughly 176 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
Land Pride RG1548 — Grapple · 310 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 310 lbs against 502 lbs of usable capacity (Conservative floor from the manufacturer's unqualified rating (772 lbs) × 0.65. The measurement point is not stated; this is the lowest value any stated basis would give), consuming 62% of the loader before you pick anything up. That leaves roughly 192 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
Land Pride RG1572 — Grapple · 490 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 490 lbs against 502 lbs of usable capacity (Conservative floor from the manufacturer's unqualified rating (772 lbs) × 0.65. The measurement point is not stated; this is the lowest value any stated basis would give), consuming 98% of the loader before you pick anything up. That leaves roughly 12 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.

Does not fit the M25HTL (42)

Showing 8 of 42.

Woods RD72 — Rotary cutter · 25+ HP · 580 lbs. Tractor PTO HP (20.2) is more than 10% below the implement minimum (25).
Land Pride RCR1272 — Rotary cutter · 25+ HP · 568 lbs. Tractor PTO HP (20.2) is more than 10% below the implement minimum (25).
CountyLine RT5CL — Rotary tiller · 25+ HP · 638 lbs. Tractor PTO HP (20.2) is more than 10% below the implement minimum (25).
Frontier RC2072 — Rotary cutter · 25+ HP · 694 lbs. Tractor PTO HP (20.2) is more than 10% below the implement minimum (25).
Frontier RT1157 — Rotary tiller · 25+ HP · 480 lbs. Tractor hitch Category I is not compatible with required Category II. Tractor PTO HP (20.2) is more than 10% below the implement minimum (25).
Woods RD60 — Rotary cutter · 25+ HP · 521 lbs. Tractor PTO HP (20.2) is more than 10% below the implement minimum (25).
King Kutter L-72-60-P — Rotary cutter · 25+ HP · 729 lbs. Tractor PTO HP (20.2) is more than 10% below the implement minimum (25).
CountyLine RC5CL — Rotary cutter · 25+ HP · 550 lbs. Tractor PTO HP (20.2) is more than 10% below the implement minimum (25).

Frequently asked questions

What is the PTO horsepower of the Zetor M25HTL?

The Zetor M25HTL produces 20.2 PTO horsepower (engine HP: 25.3), per Zetor North America official M-Series Product Guide (Rev 07/2021).

What 3-point hitch category does the Zetor M25HTL use?

The Zetor M25HTL uses HD Category 1, position control.

What is the lift capacity of the Zetor M25HTL?

The Zetor M25HTL has a 3-point lift capacity of 1325 lbs at 24 inches behind the lift points.

What rotary cutters fit the Zetor M25HTL?

Verified compatible rotary cutters include: Land Pride RCR1248, Land Pride RCR1260, Frontier RC2048, Frontier RC2060, King Kutter L-60-40-P, Bush Hog BH5, Bush Hog BH110-56.

Will a Woods RD72 fit the Zetor M25HTL?

No. The Woods RD72 is incompatible with the M25HTL. Tractor PTO HP (20.2) is more than 10% below the implement minimum (25).