Yanmar SA324 Attachments & Implements

The Yanmar SA324 is a 23.9 HP compact tractor producing 18.1 PTO HP through a 540 RPM PTO, with a Limited Category 1 hitch and a 3-point lift capacity of 1209 lb. Below: every attachment in our database checked against these specs.

Engine horsepower: 23.9 HP
PTO horsepower: 18.1 HP
PTO speeds: 540 RPM
Hitch: Limited Category 1 (Limited Category 1)
3-point lift capacity: 1209 lb
Class: Sub-compact
Series: SA Series (pre-2022 generation)
Front loader: YL210
Loader lift at pivot pin: 1199 lb

Predecessor to the SA325 in the same horsepower class. Yanmar moved from plain numeric model numbers to the SA prefix around 2022. Dual-range HST, with a mid PTO at 2057 rpm and a rear PTO at a nominal 540 rpm.

Attachment fit for the SA324 is decided by four of these figures: hitch category, PTO horsepower, PTO shaft speed, and implement weight against the 1209 lb three-point lift rating. Because this is a sub-compact tractor, implements must also be rated for sub-compact use. Front-mount attachments additionally require the correct loader quick-attach type and, for grapples, a third hydraulic function. Every figure above is read from manufacturer documentation, linked on the page.

Yanmar SA324 attachments by task

Checked against every attachment in the database, the Yanmar SA324 returns 0 full matches, 151 compatible with notes, and 38 ruled out.

What fits the Yanmar SA324 (0)

No full matches in our current database for this tractor.

Compatible with notes (151)

Showing 8 of 151.

Land Pride RCR1248 — Rotary cutter · 15+ HP · 385 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
King Kutter RTG-60 — Rotary tiller · 20+ HP · 380 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride BB0548 — Box blade · 320 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
CountyLine PHD Cat I — Post hole digger · 12+ HP · 195 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
Land Pride RCR1260 — Rotary cutter · 20+ HP · 496 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride RTA1250 — Rotary tiller · 15+ HP · 421 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
Land Pride RTA1258 — Rotary tiller · 20+ HP · 448 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride RTR1258 — Rotary tiller · 20+ HP · 463 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Does not fit the SA324 (38)

Showing 8 of 38.

Woods RD72 — Rotary cutter · 25+ HP · 580 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (18.1) is more than 10% below the implement minimum (25). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride RCR1272 — Rotary cutter · 25+ HP · 568 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (18.1) is more than 10% below the implement minimum (25). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
CountyLine RT5CL — Rotary tiller · 25+ HP · 638 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (18.1) is more than 10% below the implement minimum (25). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Frontier RC2072 — Rotary cutter · 25+ HP · 694 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (18.1) is more than 10% below the implement minimum (25). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Frontier RT1157 — Rotary tiller · 25+ HP · 480 lbs. Tractor hitch Limited Category I is not compatible with required Category II. Tractor PTO HP (18.1) is more than 10% below the implement minimum (25). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Woods RD60 — Rotary cutter · 25+ HP · 521 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (18.1) is more than 10% below the implement minimum (25). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
King Kutter L-72-60-P — Rotary cutter · 25+ HP · 729 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (18.1) is more than 10% below the implement minimum (25). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
CountyLine RC5CL — Rotary cutter · 25+ HP · 550 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (18.1) is more than 10% below the implement minimum (25). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Frequently asked questions

What is the PTO horsepower of the Yanmar SA324?

The Yanmar SA324 produces 18.1 PTO horsepower (engine HP: 23.9), per Yanmar official 324 spec sheet PDF (YT19-138, 9/19) - full field set directly confirmed, corroborated by a 2014 tractor.com professional review.

What 3-point hitch category does the Yanmar SA324 use?

The Yanmar SA324 uses Limited Category 1.

What is the lift capacity of the Yanmar SA324?

The Yanmar SA324 has a 3-point lift capacity of 1209 lbs at 24 inches behind the lift points.

What rotary cutters fit the Yanmar SA324?

No rotary cutters in our current database are a full match for the SA324. Check the "Compatible with notes" and incompatible sections below for the closest options.

Will a Woods RD72 fit the Yanmar SA324?

No. The Woods RD72 is incompatible with the SA324. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (18.1) is more than 10% below the implement minimum (25).