Yanmar SA223 Attachments & Implements

The Yanmar SA223 is a 21.5 HP compact tractor producing 15.6 PTO HP through a 540 RPM PTO, with a Limited Category 1 hitch and a 3-point lift capacity of 660 lb. Below: every attachment in our database checked against these specs.

Engine horsepower: 21.5 HP
PTO horsepower: 15.6 HP
PTO speeds: 540 RPM
Hitch: Limited Category 1 (Limited Category 1)
3-point lift capacity: 660 lb
Class: Sub-compact
Series: SA Series
Front loader: YL110
Loader lift at pivot pin: 825 lb
Loader quick-attach: pin-on

Yanmar markets this model as a sub-compact tractor. Dual-range HST, selectable 2WD/4WD, and a standard differential lock.

Attachment fit for the SA223 is decided by four of these figures: hitch category, PTO horsepower, PTO shaft speed, and implement weight against the 660 lb three-point lift rating. Because this is a sub-compact tractor, implements must also be rated for sub-compact use. Front-mount attachments additionally require the correct loader quick-attach type and, for grapples, a third hydraulic function. Every figure above is read from manufacturer documentation, linked on the page.

Yanmar SA223 attachments by task

Checked against every attachment in the database, the Yanmar SA223 returns 0 full matches, 103 compatible with notes, and 86 ruled out.

What fits the Yanmar SA223 (0)

No full matches in our current database for this tractor.

Compatible with notes (103)

Showing 8 of 103.

Land Pride RCR1248 — Rotary cutter · 15+ HP · 385 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
Land Pride BB0548 — Box blade · 320 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
CountyLine PHD Cat I — Post hole digger · 12+ HP · 195 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
Land Pride RTA1250 — Rotary tiller · 15+ HP · 421 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
Land Pride BB1260 — Box blade · 346 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
Land Pride FDR1648 — Finish mower · 15+ HP · 486 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
Land Pride FDR1660 — Finish mower · 15+ HP · 577 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
King Kutter RFM-60 — Finish mower · 15+ HP · 554 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Does not fit the SA223 (86)

Showing 8 of 86.

King Kutter RTG-60 — Rotary tiller · 20+ HP · 380 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (20). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Woods RD72 — Rotary cutter · 25+ HP · 580 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (25). Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride RCR1260 — Rotary cutter · 20+ HP · 496 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (20). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride RCR1272 — Rotary cutter · 25+ HP · 568 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (25). Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride RTA1258 — Rotary tiller · 20+ HP · 448 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (20). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride RTR1258 — Rotary tiller · 20+ HP · 463 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (20). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride SB1051 — Snow blower · 18+ HP · 390 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Land Pride SB1064 — Snow blower · 18+ HP · 501 lbs. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Frequently asked questions

What is the PTO horsepower of the Yanmar SA223?

The Yanmar SA223 produces 15.6 PTO horsepower (engine HP: 21.5), per Yanmar official SA223 product page (hitch category, gross HP, loader lift capacity) + AllMachines/TractorBob corroboration for PTO HP and 3-point lift capacity.

What 3-point hitch category does the Yanmar SA223 use?

The Yanmar SA223 uses Limited Category 1.

What is the lift capacity of the Yanmar SA223?

The Yanmar SA223 has a 3-point lift capacity of 660 lbs at 24 inches behind the lift points.

What rotary cutters fit the Yanmar SA223?

No rotary cutters in our current database are a full match for the SA223. Check the "Compatible with notes" and incompatible sections below for the closest options.

Will a King Kutter RTG-60 fit the Yanmar SA223?

No. The King Kutter RTG-60 is incompatible with the SA223. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (20).