John Deere 3043D Attachments & Implements

The John Deere 3043D is a 41.6 HP compact tractor producing 36.3 PTO HP through a 540 RPM PTO, with a SAE Category I hitch and a 3-point lift capacity of 2081 lb. Below: every attachment in our database checked against these specs.

Engine horsepower: 41.6 HP
PTO horsepower: 36.3 HP
PTO speeds: 540 RPM
Hitch: SAE Category I (Category I)
3-point lift capacity: 2081 lb
Class: Compact
Series: 3 Series
Front loader: 300E
Loader lift at pivot pin: 1186 lb
Loader quick-attach: JDQA

Attachment fit for the 3043D is decided by four of these figures: hitch category, PTO horsepower, PTO shaft speed, and implement weight against the 2081 lb three-point lift rating. Implements rated for sub-compact tractors also fit, with capacity to spare. Front-mount attachments additionally require the correct loader quick-attach type and, for grapples, a third hydraulic function. These figures are cited to the manufacturer but have not yet been checked line by line against its document, so confirm them with the maker or your dealer.

How the 3043D compares

The John Deere 3043D is rated at 36.3 PTO horsepower, which is more than 129 of the other 194 tractors in our database (the median is 31). Among the 19 John Deere models in the database it ranks 6th by PTO horsepower. Its PTO figure is 87 percent of its 41.6 engine horsepower; across the database the median is 82 percent.

Its three-point lift is 2,081 lb at 24 inches behind the lift points, more than 86 of the 173 other tractors that publish one (the median is 2,081 lb). Its loader lifts about 803 lb at 24 inches forward of the pin (500 mm forward of pin (metric SAE). Close approximation), more than 28 of the 65 other tractors with loader data on file (the median is 812 lb).

Of the 173 attachments checked, 138 are full matches, 31 are compatible with notes and 4 are ruled out. The median tractor in the database has 133 full matches, and this one has more than 123 of the other 194. The 4 ruled out fail on PTO horsepower (1), hitch category (1) and lift capacity (2); a pairing can fail on more than one check.

It is a full match for all 19 rotary tillers, 15 rear blades and all 14 landscape rakes. It has no full match among the 13 grapples and 7 pallet forks.

The widest full match by attachment type: box blade 84 in (CountyLine BB84); rotary cutter 72 in (Bush Hog BH216-3); finish mower 72 in (Bush Hog RDTH-72); snow blower 72 in (Land Pride SB1572). The next width up: rotary cutter, the 84 in Bush Hog BH217-3, is ruled out on PTO horsepower.

The heaviest full match is the Land Pride FM2560 at 965 lb, against the John Deere 3043D's 2,081 lb lift.

The closest tractors by PTO horsepower are the Branson 4215R (36 HP, −0.3), the Mahindra 2645 Shuttle (36 HP, −0.3), the TYM T474 (35.9 HP, −0.4).

Compare: Branson 4215R · Mahindra 2645 Shuttle · TYM T474

John Deere 3043D attachments by task

Checked against every attachment in the database, the John Deere 3043D returns 138 full matches, 31 compatible with notes, and 4 ruled out. Full matches by task: Box blade (21), Rotary tiller (19), Rotary cutter (17), Finish mower (15), Rear blade (15), Landscape rake (14), Post hole digger (13), Snow blower (10), Flail mower (10), Bale spear (2), Land plane (2).

What fits the John Deere 3043D (138)

Showing 8 of 138, the ones closest to this tractor's limits.

Land Pride FM2560 — Flail mower · 33+ HP · 965 lbs
Titan Attachments Flail Mower 60" — Flail mower · 30+ HP · 570 lbs
BEFCO H70-060 — Flail mower · 30+ HP · 869 lbs
Bush Hog BH216-3 — Rotary cutter · 30+ HP · 850 lbs
Rhino SE6 — Rotary cutter · 30+ HP · 620 lbs
Land Pride RCR1272 — Rotary cutter · 25+ HP · 568 lbs
CountyLine RT5CL — Rotary tiller · 25+ HP · 638 lbs
Frontier RT1157 — Rotary tiller · 25+ HP · 480 lbs

Compatible with notes (31)

Showing 8 of 31, the ones closest to this tractor's limits.

Titan Attachments Standard Grapple 72" SSQA — Grapple · 660 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 660 lbs against 803 lbs of usable capacity (500 mm forward of pin (metric SAE). Close approximation), consuming 82% of the loader before you pick anything up. That leaves roughly 143 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
Titan Attachments Standard Series Root Grapple Rake 60" SSQA — Grapple · 650 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 650 lbs against 803 lbs of usable capacity (500 mm forward of pin (metric SAE). Close approximation), consuming 81% of the loader before you pick anything up. That leaves roughly 153 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
Titan Attachments Grade 50 Standard Series Root Grapple Bucket 60" SSQA — Grapple · 617 lbs. Loader required, confirm your loader model supports this attachment (SSQA / pin-on / Euro quick-attach). This attachment weighs 617 lbs against 803 lbs of usable capacity (500 mm forward of pin (metric SAE). Close approximation), consuming 77% of the loader before you pick anything up. That leaves roughly 186 lbs for material. It will mount and lift, but expect to be capacity-limited on real loads.
WoodMaxx SB-72 — Snow blower · 25+ HP . The empty weight of this implement is not on file, so we cannot check it against the John Deere 3043D's 3-point lift capacity. Confirm the implement's weight against the operator's manual before mounting.
Woods TK72.20 — Finish mower · 20+ HP . The empty weight of this implement is not on file, so we cannot check it against the John Deere 3043D's 3-point lift capacity. Confirm the implement's weight against the operator's manual before mounting.
King Kutter PHD-1-48 — Post hole digger · 20+ HP . The empty weight of this implement is not on file, so we cannot check it against the John Deere 3043D's 3-point lift capacity. Confirm the implement's weight against the operator's manual before mounting.
Frontier SB1154 — Snow blower · 18+ HP . The empty weight of this implement is not on file, so we cannot check it against the John Deere 3043D's 3-point lift capacity. Confirm the implement's weight against the operator's manual before mounting.
WoodMaxx FM-54 — Flail mower · 15+ HP . The empty weight of this implement is not on file, so we cannot check it against the John Deere 3043D's 3-point lift capacity. Confirm the implement's weight against the operator's manual before mounting.

Does not fit the 3043D (4)

Frontier PHD395 — Post hole digger · 35+ HP · 245 lbs. Tractor hitch Category I is not compatible with required Category II.
Titan Attachments Extreme Grapple 72" SSQA — Grapple · 970 lbs. This attachment weighs 970 lbs empty, against 803 lbs of usable capacity on the John Deere 3043D loader (500 mm forward of pin (metric SAE). Close approximation). The attachment alone exceeds what this loader can carry - before any material is picked up.
Bush Hog BH217-3 — Rotary cutter · 50+ HP · 1150 lbs. Tractor PTO HP (36.3) is more than 10% below the implement minimum (50).
Titan Attachments Extreme Grapple 84" SSQA — Grapple · 1225 lbs. This attachment weighs 1225 lbs empty, against 803 lbs of usable capacity on the John Deere 3043D loader (500 mm forward of pin (metric SAE). Close approximation). The attachment alone exceeds what this loader can carry - before any material is picked up.

Frequently asked questions

What is the PTO horsepower of the John Deere 3043D?

The John Deere 3043D produces 36.3 PTO horsepower (engine HP: 41.6), per John Deere 3043D.

What 3-point hitch category does the John Deere 3043D use?

The John Deere 3043D uses SAE Category I.

What is the lift capacity of the John Deere 3043D?

The John Deere 3043D has a 3-point lift capacity of 2081 lbs at 24 inches behind the lift points.

What rotary cutters fit the John Deere 3043D?

Verified compatible rotary cutters include: Land Pride RCR1248, Land Pride RCR1260, Land Pride RCR1272, Frontier RC2048, Frontier RC2060, Frontier RC2072, King Kutter L-60-40-P, King Kutter L-72-60-P, CountyLine RC5CL, CountyLine RC6CL, Bush Hog BH5, Bush Hog BH6, Bush Hog BH215-3, Bush Hog BH216-3, Bush Hog BH115, Rhino SE5, Rhino SE6.

Will a Frontier PHD395 fit the John Deere 3043D?

No. The Frontier PHD395 is incompatible with the 3043D. Tractor hitch Category I is not compatible with required Category II.