Farmry TSB60

The Farmry TSB60 is a snow blower requiring at least 18 PTO HP, attaching via Category I 3-point hitch and weighing 715 lbs. Verified against every tractor in our database below.

Type: Snow blower
Hitch category: Category I
Minimum PTO horsepower: 18 HP
PTO speed: 540 RPM
Working weight: 715 lb
Working width: 60 in
Sub-compact rated: No

A tractor fits this snow blower when its hitch accepts Category I implements, it produces at least 18 PTO horsepower, it offers a 540 RPM PTO speed, and its three-point lift capacity exceeds the 715 lb working weight with headroom for the load the implement carries. This model is not rated for sub-compact tractors. Weight and horsepower figures here are read from the manufacturer document linked on the page, not from a retail listing.

Which tractors fit the Farmry TSB60

Checked against every tractor in the database, the Farmry TSB60 is a full match on 154 models, fits 20 with notes, and does not fit 21.

Tractors that fit (154)

Showing 8 of 154.

Kubota B2601HSD — 19.5 PTO HP · 1290 lbs lift
Kubota L2501 — 20.5 PTO HP · 1918 lbs lift
Kubota L3301 — 27.7 PTO HP · 1985 lbs lift
Kioti CK2610 — 21.7 PTO HP · 1631 lbs lift
Mahindra 1626 — 22.2 PTO HP · 1323 lbs lift
Mahindra 1635 — 26 PTO HP · 2646 lbs lift
Mahindra 1640 — 27.7 PTO HP · 2646 lbs lift
John Deere 2032R — 24.2 PTO HP · 1356 lbs lift

Compatible with notes (20)

Showing 8 of 20.

Kubota B2301HSD — 17.4 PTO HP · 1411 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
John Deere 1025R — 17.2 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
John Deere 2025R — 17.2 PTO HP · 915 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
John Deere 3025E — 17.4 PTO HP · 1356 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
New Holland Workmaster 25S — 17.4 PTO HP · 870 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
New Holland Boomer 24 — 18.5 PTO HP · 1433 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
LS Tractor MT125 — 17.2 PTO HP · 728 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
TYM T264 — 18.2 PTO HP · 1102 lbs lift. The TYM T264 has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than the 26-inch Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Tractors that do not fit (21)

Showing 8 of 21.

Kubota BX1880 — 13.7 PTO HP · 680 lbs lift. Tractor PTO HP (13.7) is more than 10% below the implement minimum (18). Implement weight (715 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Kubota BX2380 — 17.7 PTO HP · 680 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. Implement weight (715 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Kubota BX2680 — 19.5 PTO HP · 680 lbs lift. Implement weight (715 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Kubota BX23S — 17.7 PTO HP · 680 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. Implement weight (715 lbs) exceeds tractor lift capacity (680 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
John Deere 1023E — 14.9 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (18). Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Massey Ferguson GC1725M — 18.5 PTO HP · 661 lbs lift. Implement weight (715 lbs) exceeds tractor lift capacity (661 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Kioti CS2210 — 16.3 PTO HP · 700 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. Implement weight (715 lbs) exceeds tractor lift capacity (700 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Kioti CS2510 — 18.5 PTO HP · 700 lbs lift. Implement weight (715 lbs) exceeds tractor lift capacity (700 lbs). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Frequently asked questions

What is the minimum PTO horsepower for the Farmry TSB60?

The Farmry TSB60 requires 18 PTO HP minimum.

What hitch category does the Farmry TSB60 use?

The Farmry TSB60 attaches via Category I 3-point hitch.

How heavy is the Farmry TSB60?

715 lbs.

Does the Farmry TSB60 fit a Kubota BX2380?

Verdict: INCOMPATIBLE.

Is the Farmry TSB60 sub-compact compatible?

Not specifically rated for sub-compact tractors. Verify clearance and geometry with your dealer before purchase.