Land Pride RCR1248

The Land Pride RCR1248 is a rotary cutter requiring at least 15 PTO HP, attaching via Category I 3-point hitch weighing 413 lbs. Verified against every tractor in our database below.

Type

Rotary cutter

Hitch category

Category I

Minimum PTO horsepower

15 HP

PTO speed

540 RPM

Working weight

413 lb

Working width

48 in

Sub-compact rated

Yes

A tractor fits this rotary cutter when its hitch accepts Category I implements, it produces at least 15 PTO horsepower, it offers a 540 RPM PTO speed, and its three-point lift capacity exceeds the 413 lb working weight with headroom for the load the implement carries. The manufacturer rates this model for sub-compact tractors. These figures have not yet been checked line by line against a manufacturer document, so confirm them with the maker or your dealer.

How the RCR1248 compares

Among the 18 rotary cutters in our database, at 413 lb it is heavier than 0 of the 17 other rotary cutters that publish a weight (the median is 573 lb); at 48 inches wide it is wider than 0 of the other 17 that list a width; its 15 PTO horsepower minimum is higher than 0 of the other 17 that list one (the median is 25).

Of the 195 tractors checked, 155 are full matches, 40 are compatible with notes and 0 are ruled out. The median rotary cutter has 112 full-match tractors.

Full matches by brand: Kubota (34), Kioti (22), John Deere (16), Massey Ferguson (16), Branson (12) and 9 more brands. The smallest tractor that fits in full is the LS Tractor MT122 at 15 PTO horsepower, and the largest is the Mahindra 5570 at 61.

Of the 26 sub-compact tractors in the database, 13 are full matches. The maker rates this model for sub-compact tractors.

Within the rotary cutters by width, the next wider rotary cutter is the Bush Hog BH115 at 56 in; it needs 5 PTO horsepower more; it weighs 87 lb more; it fits in full 29 fewer tractors.

The closest rotary cutters by weight are the Bush Hog BH5 (491 lb), the Land Pride RCR1260 (496 lb), the Bush Hog BH115 (500 lb).

Compare: Bush Hog BH5 · Land Pride RCR1260 · Bush Hog BH115

Which tractors fit the Land Pride RCR1248

Checked against every tractor in the database, the Land Pride RCR1248 is a full match on 155 models, fits 40 with notes, and does not fit 0.

Tractors that fit (155)

Showing 8 of 155, the ones closest to this implement's limits.

• LS Tractor MT122 — 15 PTO HP · 728 lbs lift
• Branson 2205H — 15.4 PTO HP · 1100 lbs lift
• RK Tractors RK21H — 15.4 PTO HP · 679 lbs lift
• Kioti CS2210 — 16.3 PTO HP · 700 lbs lift
• Mahindra eMax 25L — 16.9 PTO HP · 680 lbs lift
• LS Tractor MT125 — 17.2 PTO HP · 728 lbs lift
• Kubota B2301HSD — 17.4 PTO HP · 1411 lbs lift
• John Deere 3025E — 17.4 PTO HP · 1356 lbs lift

Compatible with notes (40)

Showing 8 of 40, the ones closest to this implement's limits.

• TYM T224 — 15.1 PTO HP · 679 lbs lift. The TYM T224 has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not.
• John Deere 1023E — 14.9 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• Yanmar SA223 — 15.6 PTO HP · 660 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
• Yanmar SA221 — 15.6 PTO HP · lift not published. 3-point lift capacity is not on file for the Yanmar SA221. This implement weighs 413 lbs - confirm your tractor's rated lift capacity against the operator's manual before mounting.
• Mahindra eMax 20S — 14.2 PTO HP · 680 lbs lift. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• Mahindra eMax 22L — 15.9 PTO HP · 680 lbs lift. This implement needs 15 PTO HP. The Mahindra eMax 22L is listed at 15.9 PTO HP, but the hydrostatic version delivers 14.9 - below the implement minimum. If yours is the HST, size down or expect to work it slowly. Check which figure your spec sheet quotes.
• Kubota BX1880 — 13.7 PTO HP · 680 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• John Deere 1025R — 17.2 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.

Tractors that do not fit (0)

None. Every tractor in our database is compatible.

Frequently asked questions

What is the minimum PTO horsepower for the Land Pride RCR1248?

The Land Pride RCR1248 requires 15 PTO HP minimum.

What hitch category does the Land Pride RCR1248 use?

The Land Pride RCR1248 attaches via Category I 3-point hitch.

How heavy is the Land Pride RCR1248?

413 lbs.

Does the Land Pride RCR1248 fit a Kubota BX2380?

Verdict: FULL MATCH.

Is the Land Pride RCR1248 sub-compact compatible?

Yes. The manufacturer rates this attachment for sub-compact tractor geometry.