King Kutter L-72-60-P

The King Kutter L-72-60-P is a rotary cutter requiring at least 25 PTO HP, attaching via Category I 3-point hitch weighing 729 lbs. Verified against every tractor in our database below.

Type

Rotary cutter

Hitch category

Category I

Minimum PTO horsepower

25 HP

PTO speed

540 RPM

Working weight

729 lb

Working width

72 in

Sub-compact rated

No

A tractor fits this rotary cutter when its hitch accepts Category I implements, it produces at least 25 PTO horsepower, it offers a 540 RPM PTO speed, and its three-point lift capacity exceeds the 729 lb working weight with headroom for the load the implement carries. This model is not rated for sub-compact tractors. These figures have not yet been checked line by line against a manufacturer document, so confirm them with the maker or your dealer.

How the L-72-60-P compares

Among the 18 rotary cutters in our database, at 729 lb it is heavier than 14 of the 17 other rotary cutters that publish a weight (the median is 573 lb); at 72 inches wide it is wider than 10 of the other 17 that list a width; its 25 PTO horsepower minimum is higher than 7 of the other 17 that list one (the median is 25).

Of the 195 tractors checked, 112 are full matches, 26 are compatible with notes and 57 are ruled out. The median rotary cutter has 112 full-match tractors. The 57 ruled out fail on PTO horsepower (57) and lift capacity (19); a pairing can fail on more than one check.

Full matches by brand: Kubota (22), Kioti (16), John Deere (13), Mahindra (10), Massey Ferguson (10) and 9 more brands. The smallest tractor that fits in full is the Branson 3015H at 25 PTO horsepower, and the largest is the Mahindra 5570 at 61.

Of the 26 sub-compact tractors in the database, 0 are full matches. The maker does not rate this model for sub-compact tractors.

Within the rotary cutters by width, the next narrower rotary cutter is the Bush Hog BH215-3 at 60 in; it weighs 21 lb more; it fits in full the same number of tractors. In the other direction, the next wider rotary cutter is the Bush Hog BH217-3 at 84 in; it needs 25 PTO horsepower more; it weighs 421 lb more; it fits in full 103 fewer tractors.

The closest rotary cutters by weight are the Bush Hog BH215-3 (750 lb), the Frontier RC2072 (694 lb), the CountyLine RC6CL (650 lb).

Compare: Bush Hog BH215-3 · Frontier RC2072 · CountyLine RC6CL

Which tractors fit the King Kutter L-72-60-P

Checked against every tractor in the database, the King Kutter L-72-60-P is a full match on 112 models, fits 26 with notes, and does not fit 57.

Tractors that fit (112)

Showing 8 of 112, the ones closest to this implement's limits.

• John Deere 3032E — 25 PTO HP · 1356 lbs lift
• Branson 3015R — 25 PTO HP · 2425 lbs lift
• Branson 3015H — 25 PTO HP · 2425 lbs lift
• Mahindra 1635 — 26 PTO HP · 2646 lbs lift
• Kubota LX3310 — 27 PTO HP · 2469 lbs lift
• Kubota B3350 — 27 PTO HP · 1676 lbs lift
• Yanmar YT235 — 27 PTO HP · 1300 lbs lift
• Massey Ferguson 1M.35 — 27.5 PTO HP · 2535 lbs lift

Compatible with notes (26)

Showing 8 of 26, the ones closest to this implement's limits.

• New Holland Boomer 33 — 24.8 PTO HP · 1345 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• John Deere 2032R — 24.2 PTO HP · 1356 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• LS Tractor XR3032 — 26.4 PTO HP · lift not published. 3-point lift capacity is not on file for the LS Tractor XR3032. This implement weighs 729 lbs - confirm your tractor's rated lift capacity against the operator's manual before mounting.
• Kioti CK30 — 23 PTO HP · 1764 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• LS Tractor XG3032 — 27.4 PTO HP · lift not published. 3-point lift capacity is not on file for the LS Tractor XG3032. This implement weighs 729 lbs - confirm your tractor's rated lift capacity against the operator's manual before mounting.
• LS Tractor XR3135H — 28.6 PTO HP · lift not published. 3-point lift capacity is not on file for the LS Tractor XR3135H. This implement weighs 729 lbs - confirm your tractor's rated lift capacity against the operator's manual before mounting.
• New Holland Workmaster 55 — 40 PTO HP · lift not published. This tractor has a Category II hitch and the implement is Category I. The lower-link balls and top-link pin are oversized for the implement, so Category I reducer bushings are required. They are widely available. Confirm lower-link spacing before buying. 3-point lift capacity is not on file for the New Holland Workmaster 55. This implement weighs 729 lbs - confirm your tractor's rated lift capacity against the operator's manual before mounting.
• Case IH Farmall 55A — 40 PTO HP · lift not published. 3-point lift capacity is not on file for the Case IH Farmall 55A. This implement weighs 729 lbs - confirm your tractor's rated lift capacity against the operator's manual before mounting.

Tractors that do not fit (57)

Showing 8 of 57, the ones closest to this implement's limits.

• Kioti CS2610 — 22.3 PTO HP · 700 lbs lift. Tractor PTO HP (22.3) is more than 10% below the implement minimum (25). Implement weight (729 lbs) exceeds tractor lift capacity (700 lbs).
• Mahindra 1626 — 22.2 PTO HP · 1323 lbs lift. Tractor PTO HP (22.2) is more than 10% below the implement minimum (25).
• Bobcat CT2025 — 22.2 PTO HP · 1631 lbs lift. Tractor PTO HP (22.2) is more than 10% below the implement minimum (25).
• Kioti CK2610 — 21.7 PTO HP · 1631 lbs lift. Tractor PTO HP (21.7) is more than 10% below the implement minimum (25).
• Branson 2515R — 21 PTO HP · 2420 lbs lift. Tractor PTO HP (21) is more than 10% below the implement minimum (25).
• Branson 2515H — 21 PTO HP · 2425 lbs lift. Tractor PTO HP (21) is more than 10% below the implement minimum (25).
• Massey Ferguson 1726E — 21 PTO HP · 1598 lbs lift. Tractor PTO HP (21) is more than 10% below the implement minimum (25). This implement needs 25 PTO HP. The Massey Ferguson 1726E is listed at 21 PTO HP, but the hydrostatic version delivers 19.7 - below the implement minimum. If yours is the HST, size down or expect to work it slowly. Check which figure your spec sheet quotes.
• John Deere 3025D — 20.7 PTO HP · 2081 lbs lift. Tractor PTO HP (20.7) is more than 10% below the implement minimum (25).

Frequently asked questions

What is the minimum PTO horsepower for the King Kutter L-72-60-P?

The King Kutter L-72-60-P requires 25 PTO HP minimum.

What hitch category does the King Kutter L-72-60-P use?

The King Kutter L-72-60-P attaches via Category I 3-point hitch.

How heavy is the King Kutter L-72-60-P?

729 lbs.

Does the King Kutter L-72-60-P fit a Kubota BX2380?

Verdict: INCOMPATIBLE.

Is the King Kutter L-72-60-P sub-compact compatible?

Not specifically rated for sub-compact tractors. Verify clearance and geometry with your dealer before purchase.