King Kutter PHD-09-SC

The King Kutter PHD-09-SC is a post hole digger requiring at least 20 PTO HP, attaching via Category I 3-point hitch and weighing 350 lbs. Verified against every tractor in our database below.

Type

Post hole digger

Hitch category

Category I

Minimum PTO horsepower

20 HP

PTO speed

540 RPM

Working weight

350 lb

Working width

9 in

Sub-compact rated

No

A tractor fits this post hole digger when its hitch accepts Category I implements, it produces at least 20 PTO horsepower, it offers a 540 RPM PTO speed, and its three-point lift capacity exceeds the 350 lb working weight with headroom for the load the implement carries. This model is not rated for sub-compact tractors. Weight and horsepower figures here are read from the manufacturer document linked on the page, not from a retail listing.

Which tractors fit the King Kutter PHD-09-SC

Checked against every tractor in the database, the King Kutter PHD-09-SC is a full match on 143 models, fits 31 with notes, and does not fit 21.

Tractors that fit (143)

Showing 8 of 143.

• Kubota L2501 — 20.5 PTO HP · 1918 lbs lift
• Kubota L3301 — 27.7 PTO HP · 1985 lbs lift
• Kioti CK2610 — 21.7 PTO HP · 1631 lbs lift
• Mahindra 1626 — 22.2 PTO HP · 1323 lbs lift
• Mahindra 1635 — 26 PTO HP · 2646 lbs lift
• Mahindra 1640 — 27.7 PTO HP · 2646 lbs lift
• John Deere 2032R — 24.2 PTO HP · 1356 lbs lift
• John Deere 2038R — 30 PTO HP · 1356 lbs lift

Compatible with notes (31)

Showing 8 of 31.

• Kubota BX2680 — 19.5 PTO HP · 680 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kubota B2601HSD — 19.5 PTO HP · 1290 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• Massey Ferguson GC1725M — 18.5 PTO HP · 661 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kioti CS2510 — 18.5 PTO HP · 700 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kubota LX2610 — 19.5 PTO HP · 1918 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• New Holland Boomer 24 — 18.5 PTO HP · 1433 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• LS Tractor XG3025 — 19.2 PTO HP · 1433 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• Massey Ferguson GC1723E — 18.7 PTO HP · 661 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Tractors that do not fit (21)

Showing 8 of 21.

• Kubota BX1880 — 13.7 PTO HP · 680 lbs lift. Tractor PTO HP (13.7) is more than 10% below the implement minimum (20). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kubota BX2380 — 17.7 PTO HP · 680 lbs lift. Tractor PTO HP (17.7) is more than 10% below the implement minimum (20). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kubota BX23S — 17.7 PTO HP · 680 lbs lift. Tractor PTO HP (17.7) is more than 10% below the implement minimum (20). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• Kubota B2301HSD — 17.4 PTO HP · 1411 lbs lift. Tractor PTO HP (17.4) is more than 10% below the implement minimum (20).
• John Deere 1023E — 14.9 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (20). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• John Deere 1025R — 17.2 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (17.2) is more than 10% below the implement minimum (20). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
• John Deere 2025R — 17.2 PTO HP · 915 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (17.2) is more than 10% below the implement minimum (20).
• John Deere 3025E — 17.4 PTO HP · 1356 lbs lift. Tractor PTO HP (17.4) is more than 10% below the implement minimum (20).

Frequently asked questions

What is the minimum PTO horsepower for the King Kutter PHD-09-SC?

The King Kutter PHD-09-SC requires 20 PTO HP minimum.

What hitch category does the King Kutter PHD-09-SC use?

The King Kutter PHD-09-SC attaches via Category I 3-point hitch.

How heavy is the King Kutter PHD-09-SC?

350 lbs.

Does the King Kutter PHD-09-SC fit a Kubota BX2380?

Verdict: INCOMPATIBLE.

Is the King Kutter PHD-09-SC sub-compact compatible?

Not specifically rated for sub-compact tractors. Verify clearance and geometry with your dealer before purchase.