Woods TS44

The Woods TS44 is a flail mower requiring at least 18 PTO HP, attaching via Category I 3-point hitch and weighing 410 lbs. Verified against every tractor in our database below.

Type: Flail mower
Hitch category: Category I
Minimum PTO horsepower: 18 HP
PTO speed: 540 RPM
Working weight: 410 lb
Working width: 44 in
Sub-compact rated: No

A tractor fits this flail mower when its hitch accepts Category I implements, it produces at least 18 PTO horsepower, it offers a 540 RPM PTO speed, and its three-point lift capacity exceeds the 410 lb working weight with headroom for the load the implement carries. This model is not rated for sub-compact tractors. Weight and horsepower figures here are read from the manufacturer document linked on the page, not from a retail listing.

Which tractors fit the Woods TS44

Checked against every tractor in the database, the Woods TS44 is a full match on 156 models, fits 29 with notes, and does not fit 10.

Tractors that fit (156)

Showing 8 of 156.

Kubota B2601HSD — 19.5 PTO HP · 1290 lbs lift
Kubota L2501 — 20.5 PTO HP · 1918 lbs lift
Kubota L3301 — 27.7 PTO HP · 1985 lbs lift
Kioti CK2610 — 21.7 PTO HP · 1631 lbs lift
Mahindra 1626 — 22.2 PTO HP · 1323 lbs lift
Mahindra 1635 — 26 PTO HP · 2646 lbs lift
Mahindra 1640 — 27.7 PTO HP · 2646 lbs lift
John Deere 2032R — 24.2 PTO HP · 1356 lbs lift

Compatible with notes (29)

Showing 8 of 29.

Kubota BX2380 — 17.7 PTO HP · 680 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Kubota BX2680 — 19.5 PTO HP · 680 lbs lift. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Kubota BX23S — 17.7 PTO HP · 680 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Kubota B2301HSD — 17.4 PTO HP · 1411 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
John Deere 1025R — 17.2 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
John Deere 2025R — 17.2 PTO HP · 915 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
John Deere 3025E — 17.4 PTO HP · 1356 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
Massey Ferguson GC1725M — 18.5 PTO HP · 661 lbs lift. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Tractors that do not fit (10)

Showing 8 of 10.

Kubota BX1880 — 13.7 PTO HP · 680 lbs lift. Tractor PTO HP (13.7) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
John Deere 1023E — 14.9 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (14.9) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Mahindra eMax 20S — 14.2 PTO HP · 680 lbs lift. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than the 26-inch Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Tractor PTO HP (14.2) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Mahindra eMax 22L — 15.9 PTO HP · 680 lbs lift. Tractor PTO HP (15.9) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
TYM T224 — 15.1 PTO HP · 679 lbs lift. The TYM T224 has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than the 26-inch Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Tractor PTO HP (15.1) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
LS Tractor MT122 — 15 PTO HP · 728 lbs lift. Tractor PTO HP (15) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Yanmar SA223 — 15.6 PTO HP · 660 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. Tractor PTO HP (15.6) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Branson 2205H — 15.4 PTO HP · 1100 lbs lift. Tractor PTO HP (15.4) is more than 10% below the implement minimum (18). This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.

Frequently asked questions

What is the minimum PTO horsepower for the Woods TS44?

The Woods TS44 requires 18 PTO HP minimum.

What hitch category does the Woods TS44 use?

The Woods TS44 attaches via Category I 3-point hitch.

How heavy is the Woods TS44?

410 lbs.

Does the Woods TS44 fit a Kubota BX2380?

Verdict: COMPATIBLE WITH NOTES.

Is the Woods TS44 sub-compact compatible?

Not specifically rated for sub-compact tractors. Verify clearance and geometry with your dealer before purchase.