BEFCO H40-S 48"

The BEFCO H40-S 48" is a flail mower requiring at least 16 PTO HP, attaching via Category I 3-point hitch and weighing 450 lbs. Verified against every tractor in our database below.

Type

Flail mower

Hitch category

Category I

Minimum PTO horsepower

16 HP

PTO speed

540 RPM

Working weight

450 lb

Working width

48 in

Sub-compact rated

Yes

A tractor fits this flail mower when its hitch accepts Category I implements, it produces at least 16 PTO horsepower, it offers a 540 RPM PTO speed, and its three-point lift capacity exceeds the 450 lb working weight with headroom for the load the implement carries. The manufacturer rates this model for sub-compact tractors. Weight and horsepower figures here are read from the manufacturer document linked on the page, not from a retail listing.

Which tractors fit the BEFCO H40-S 48"

Checked against every tractor in the database, the BEFCO H40-S 48" is a full match on 150 models, fits 43 with notes, and does not fit 2.

Tractors that fit (150)

Showing 8 of 150.

• Kubota BX2380 — 17.7 PTO HP · 680 lbs lift
• Kubota BX2680 — 19.5 PTO HP · 680 lbs lift
• Kubota BX23S — 17.7 PTO HP · 680 lbs lift
• Kubota B2601HSD — 19.5 PTO HP · 1290 lbs lift
• Kubota B2301HSD — 17.4 PTO HP · 1411 lbs lift
• Kubota L2501 — 20.5 PTO HP · 1918 lbs lift
• Kubota L3301 — 27.7 PTO HP · 1985 lbs lift
• John Deere 3025E — 17.4 PTO HP · 1356 lbs lift

Compatible with notes (43)

Showing 8 of 43.

• John Deere 1023E — 14.9 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load.
• John Deere 1025R — 17.2 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
• John Deere 2025R — 17.2 PTO HP · 915 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
• Mahindra eMax 22L — 15.9 PTO HP · 680 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement needs 16 PTO HP. The Mahindra eMax 22L is listed at 15.9 PTO HP, but the hydrostatic version delivers 14.9 - below the implement minimum. If yours is the HST, size down or expect to work it slowly. Check which figure your spec sheet quotes.
• New Holland Workmaster 25S — 17.4 PTO HP · 870 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
• New Holland Boomer 24 — 18.5 PTO HP · 1433 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
• LS Tractor XG3025 — 19.2 PTO HP · lift not published. 3-point lift capacity is not on file for the LS Tractor XG3025. This implement weighs 450 lbs - confirm your tractor's rated lift capacity against the operator's manual before mounting.
• LS Tractor XG3032 — 27.4 PTO HP · lift not published. 3-point lift capacity is not on file for the LS Tractor XG3032. This implement weighs 450 lbs - confirm your tractor's rated lift capacity against the operator's manual before mounting.

Tractors that do not fit (2)

• Kubota BX1880 — 13.7 PTO HP · 680 lbs lift. Tractor PTO HP (13.7) is more than 10% below the implement minimum (16).
• Mahindra eMax 20S — 14.2 PTO HP · 680 lbs lift. The Mahindra eMax 20S has a Category 1 Narrow hitch. Pin diameters are standard Category 1, so this implement will pin up, but the lower links sit closer together than standard Category 1 spacing. Measure your lower-link spread against this implement's pin spacing before buying - many Category 1 implements fit once the links are adjusted, and some do not. Tractor PTO HP (14.2) is more than 10% below the implement minimum (16).

Frequently asked questions

What is the minimum PTO horsepower for the BEFCO H40-S 48"?

The BEFCO H40-S 48" requires 16 PTO HP minimum.

What hitch category does the BEFCO H40-S 48" use?

The BEFCO H40-S 48" attaches via Category I 3-point hitch.

How heavy is the BEFCO H40-S 48"?

450 lbs.

Does the BEFCO H40-S 48" fit a Kubota BX2380?

Verdict: FULL MATCH.

Is the BEFCO H40-S 48" sub-compact compatible?

Yes. The manufacturer rates this attachment for sub-compact tractor geometry.