King Kutter RFM-60
The King Kutter RFM-60 is a finish mower requiring at least 15 PTO HP, attaching via Category I 3-point hitch and weighing 554 lbs. Verified against every tractor in our database below.
- Type
- Finish mower
- Hitch category
- Category I
- Minimum PTO horsepower
- 15 HP
- PTO speed
- 540 RPM
- Working weight
- 554 lb
- Working width
- 60 in
- Sub-compact rated
- No
A tractor fits this finish mower when its hitch accepts Category I implements, it produces at least 15 PTO horsepower, it offers a 540 RPM PTO speed, and its three-point lift capacity exceeds the 554 lb working weight with headroom for the load the implement carries. This model is not rated for sub-compact tractors. Weight and horsepower figures here are read from the manufacturer document linked on the page, not from a retail listing.
Which tractors fit the King Kutter RFM-60
Checked against every tractor in the database, the King Kutter RFM-60 is a full match on 157 models, fits 38 with notes, and does not fit 0.
Tractors that fit (157)
Showing 8 of 157.
- Kubota B2601HSD — 19.5 PTO HP · 1290 lbs lift
- Kubota B2301HSD — 17.4 PTO HP · 1411 lbs lift
- Kubota L2501 — 20.5 PTO HP · 1918 lbs lift
- Kubota L3301 — 27.7 PTO HP · 1985 lbs lift
- John Deere 3025E — 17.4 PTO HP · 1356 lbs lift
- Kioti CK2610 — 21.7 PTO HP · 1631 lbs lift
- Mahindra 1626 — 22.2 PTO HP · 1323 lbs lift
- Mahindra 1635 — 26 PTO HP · 2646 lbs lift
Compatible with notes (38)
Showing 8 of 38.
- Kubota BX1880 — 13.7 PTO HP · 680 lbs lift. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- Kubota BX2380 — 17.7 PTO HP · 680 lbs lift. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- Kubota BX2680 — 19.5 PTO HP · 680 lbs lift. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- Kubota BX23S — 17.7 PTO HP · 680 lbs lift. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- John Deere 1023E — 14.9 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. PTO horsepower is marginal, verify with implement manufacturer before operating at full load. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- John Deere 1025R — 17.2 PTO HP · 758 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
- John Deere 2025R — 17.2 PTO HP · 915 lbs lift. This tractor uses a Limited Category I hitch. Pin diameters and lower-link spacing meet the standard Category I specification, so Category I implements mount normally - what is limited is lift height, ground clearance and lift-frame capacity. Check the implement's weight against this tractor's 3-point lift figure, and expect less clearance under the implement when raised.
- Massey Ferguson GC1725M — 18.5 PTO HP · 661 lbs lift. Lift capacity headroom is tight, recommend adding front ballast weights. This implement is not specifically rated for sub-compact tractors, verify clearance and geometry with your dealer.
Tractors that do not fit (0)
None. Every tractor in our database is compatible.
Frequently asked questions
What is the minimum PTO horsepower for the King Kutter RFM-60?
The King Kutter RFM-60 requires 15 PTO HP minimum.
What hitch category does the King Kutter RFM-60 use?
The King Kutter RFM-60 attaches via Category I 3-point hitch.
How heavy is the King Kutter RFM-60?
554 lbs.
Does the King Kutter RFM-60 fit a Kubota BX2380?
Verdict: COMPATIBLE WITH NOTES.
Is the King Kutter RFM-60 sub-compact compatible?
Not specifically rated for sub-compact tractors. Verify clearance and geometry with your dealer before purchase.